Penticton GNSS VLBI
Site informations
| Site name | Penticton |
|---|---|
| Country | CANADA |
| Longitude | -119.62 |
| Latitude | 49.323 |
| Tectonic plate | NORTH AMERICAN |
Points information and selection :
| ITRF | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | cdp | Domes | Description | Code Domes Description |
94 | 96 | 97 | 2000 | 2005 | 2008 | 2014 | 2020 | 2020
u2023 |
||
|
|
7283
|
7283 | 40105M001 | Mobile VLBI mark 7283 |
7283
40105M001 Mobile VLBI mark 7283 |
||||||||||
|
|
DR3O
|
40105M002 | GPS MARK 887006 |
DR3O
40105M002 GPS MARK 887006 |
|||||||||||
|
|
DRA3
|
40105M003 | The GNSS reference mark consists of a 0.125 m diameter steel cylinder, 2 m high above ground and drilled into bedrock to a depth of approx. 6 m. The top of the monument is fitted with a 0.15m diameter stainless steel cap welded to the pipe and fitted with a centered 5/8 inch bolt. The top of the stainless steel cap serves as the ARP and is fitted with a 10cm forced centering spacer. |
DRA3
40105M003 The GNSS reference mark consists of a 0.125 m diameter steel cylinder, 2 m high above ground and drilled into bedrock to a depth of approx. 6 m. The top of the monument is fitted with a 0.15m diameter stainless steel cap welded to the pipe and fitted with a centered 5/8 inch bolt. The top of the stainless steel cap serves as the ARP and is fitted with a 10cm forced centering spacer. |
|||||||||||
|
|
DRA4
|
40105M004 | The GNSS reference mark consists of a 0.125 m diameter steel cylinder, 2 m high above ground and drilled into bedrock to a depth of approx. 6 m. The top of the monument is fitted with a 0.15m diameter stainless steel cap welded to the pipe and fitted with a centered 5/8 inch bolt. The top of the stainless steel cap serves as the ARP and is fitted with a 10cm forced centering spacer. |
DRA4
40105M004 The GNSS reference mark consists of a 0.125 m diameter steel cylinder, 2 m high above ground and drilled into bedrock to a depth of approx. 6 m. The top of the monument is fitted with a 0.15m diameter stainless steel cap welded to the pipe and fitted with a centered 5/8 inch bolt. The top of the stainless steel cap serves as the ARP and is fitted with a 10cm forced centering spacer. |
|||||||||||
|
|
|
40105S002 | TI4100/L1 |
40105S002 TI4100/L1 |
|||||||||||
|
|
|
40105S003 | ROGUE SNR-8/DM B/L1 27-FEB-91 |
40105S003 ROGUE SNR-8/DM B/L1 27-FEB-91 |
|||||||||||